123 HP Officejet 3830 Wireless Setup

Wireless Setup

Change the Network settings:

Using the Printer Control panel you can setup and manage your wireless connection and perform a variety of network management task. Changing Network settings is only for the convenience for the User and is not to thoroughly experiment to the level of advanced User. i.e., link speed, IP settings, default gateway and firewall settings.

Procedure to Print Network settings:

  1. Touch or Swipe down the tab to open the Dashboard, Touch Ethernet icon to display the network status screen. In order to proceed further, Touch Settings and tap Print Details to print the Network Configuration page
  2. Touch or Swipe down the tab to open the Dashboard, Touch Wireless and tap Settings. In order to proceed further, Touch Wireless Setup wizard / Wi-Fi Setup and tap Reports and Touch Network Configuration Report

Procedure to set the Link Speed:

The user can change the speed at which data is transmitted over the wireless network.

  1. Locate the printer control panel and Touch or Swipe down the tab to open the Dashboard
  2. Touch Ethernet Icon and then Touch Network Setup
  3. Touch Ethernet settings
  4. Select Advance Settings
  5. Touch Link Speed
  6. Touch the correct Link Speed option that synchronizes your network hardware

Procedure to change IP settings:

The wireless connection IP setting is by default set automatically. If you are an Advance User and want to change IP Address, subnet mask, or the default gateway, then follow the given below instructions.

  1. Locate the printer control panel and Touch or Swipe down the tab to open the Dashboard
  2. Touch Setup and then Touch Network Setup
  3. Touch Ethernet or Wireless Settings

Note: It is recommended that prior to manual settings, you establish a printer and network connection using Automatic Mode. This permits the router to connect and configure the printer on IP Address, subnet mask, or default gateway and DNS address

  1. Touch Advance Settings
  2. Touch IP settings, you get a prompt message display, Changing the IP Address removes the printer from the network. Touch OK button to continue
  3. To change the IP settings manually, Touch Manual(Static).
  1. enter the available information for the following settings:
  • IP Address
  • Subnet Mask
  • Default Gateway
  • DNS Address
  1. Once completed the manual settings then Touch Done
  2. Touch OK button

123.hp.com/oj3830 & Call Toll Free 1 888 288 5279

Setting up the Printer for Wireless Direct Connection:

You can connect to the Printer wirelessly without using a Router. Using the Wireless Direct feature, you can print from a Computer, smart phone, tablet etc., Follow the guidelines to establish a Wireless Direct:

  1. Ensure your computer or mobile is installed with the necessary 123 HP Officejet 3830 Printer software / application
  2. Otherwise, You can also install the necessary 123 HP Officejet 3830 Printer software, online, using the Wireless Direct

Note: 123 HP Officejet 3830 Printer software might prompt for the connection type during installation, select wireless.

  1. Make sure you turn ON Wireless Direct in Printer and enable security if needed
  2. Configure the Wireless Direct for at least five Computers and five mobile devices
  3. Nevertheless the Wireless Direct can be used in Computers, Mobiles, and tablets that are enabled with a USB / Wireless Network

Procedure to enable the Wireless Direct Connection:

  1. Locate the printer control panel and Touch or Swipe down the tab to open the Dashboard
  2. Touch Wireless Setup and Tap Settings
  3. Touch Wi-Fi Direct to know on its status, if it is OFF then Press the back button
  4. Touch Wi-Fi Direct and follow the onscreen instructions to synchronize the Printer to a Network
  5. Touch Security Password in the screen to enter the password or WPS PIN code to turn Wireless Direct ON

Procedure to Print from a Mobile Wireless Direct Connection:

In order to print from your mobile you need to have installed the 123 HP Officejet 3830 Print Service Plug-in that is compatible to your device.

  1. Make sure you turn ON Wireless Direct in Printer
  2. Enable the Wi-Fi Direct connection ON in your Mobile
  3. From the Mobile device try to reach for a New Connection. Choose the Wireless Direct Name for selecting the corresponding Printer
  4. Enter the Wi-Fi Direct password / PIN code
  5. After establishing the Wireless Direct connection, Print your document

Procedure to Print from a Computer Wireless Direct Connection (Windows OS):

  1. Make sure you turn ON Wireless Direct in Printer
  2. Enable the Wireless connection ON in your Computer
  3. From the Computer try to reach for a New Connection. Choose the Wireless Direct Name for selecting the corresponding Printer
  4. Enter the Wireless Direct password
  5. Proceed to Step 6, if the printer and computer is wireless connected. Otherwise, for a printer and computer connected through USB, follow the given below steps:
  • Open the 123 HP Officejet 3830 Printer software
  • Click Tools
  • Click Device Setup & Software and then select Connect a new printer

Note: If you already have a USB connection for your printer and In order to change it to Wireless Direct, you need not have to select the option Convert a USB connected Printer to Wireless

  • When the New Printer Drive setup prompts for the network connection then select wireless
  • Select the 123 HP Officejet 3830 printer from the list of printers
  • Follow the onscreen instructions to complete the printer wireless network setup
  1. After establishing the Wireless direct, Print your document

Procedure to Print from a Computer Wireless Direct Connection (OS X):

  1. Make sure you turn ON Wireless Direct in Printer
  2. Enable the Wireless connection ON in your Computer
  3. From the Computer try to reach for a New Connection. Choose the Wireless Direct Name for selecting the corresponding Printer
  4. Enter the Wireless Direct password
  5. Proceed to Step 6, if the printer and computer is wireless connected. Otherwise, for a printer and computer connected through USB, follow the given below steps:
  6. Open System Preferences to Add Printer
  7. Click Printers & Scanners
  8. Select the 123 HP Officejet 3830 printer from the list of printers and Click + sign to Add Printer
  9. When the Add Printer Setup prompts for the network connection then select wireless
  10. After establishing the Wireless direct, Print your document

Disclaimer: 

123hpsetup.ca has no affiliation with any of the third-party companies unless such relationship is expressly specified. All the information in this site is published in good faith and for general information purpose only. We do not make any warranty about the reliability and accuracy of this information. we provide help and support to those who need advice in taking their own websites to the next level. Anyone using the links does so at their own risk.

123.hp.com/oj3830 & Call Toll Free 1 888 288 5279

call button